Safety first!

Safety

We want your children to enjoy our Climbing Frames. Our design team, many of which are just big kids themselves, spend hours labouring over the tiniest detail to makes sure fun is a priority. However, your children’s safety comes first, which is why we have all of our Climbing Frames independently tested to CE EN71 standards.

If you’re like me, you want the best for your child, but terms such as ‘independently tested’ and ‘CE EN71’ go straight over the top of your head. As a company, we try to be as transparent as possible which is why I decided to investigate what CE EN71 actually means. Amongst my digging I found website, toysadvice.co.uk[1], which was very helpful with my research.

CE
The CE marking isn’t actually for you. It is to show the authorities who regulate toy safety in the UK and tells them that the Climbing Frames or Playsystem is going to be sold within the European Community and conforms to their safety requirements.  Whilst it is not predominately for you, it doesn’t mean it is not important. If you purchase a Climbing Frame without a CE mark then you will never know if it’s been made according to EU safety regulations.

EN71
EN71 applies to all toys for children up the age of 14. Within these limitations, it divides the suitability into age ranges and adds warnings to toys meant for children under three. After a very long time researching, I’ve identified how we comply with the standards that the EN71 have set:

Weight test:
We hang weights culminating in 200 kg, approximately 10x the weight of an average 6 years old, to ensure the strength of our Climbing Frames. The weights are divided by two 100kg weights attached to the swing hooks which are then left for hours to ensure there are no weaknesses. In addition to the swings being tested, each platform is tested with 100kg weight to ensure your Climbing Frame doesn’t buckle as your children, and their friends descend on it each weekend.

Gauge:
We use different size gauges that represent the average size of a child’s head and feet. These gauges are then pushed through relevant gaps, foot gauge on the climbing wall and the head sized gauge on the monkeybars, to make sure that your kids can’t become trapped and injured whilst playing.

Toggle
Fashion can be a nightmare for Climbing Frames. Coats, long tops, tights, trousers and belts can become trapped in gaps and on loose screws. During testing, a metal chain with an attached toggle is dragged across any gaps and pulled down the slide to identify anything it can be come caught on. For further protection, all nuts and bolts are safely covered with plastic caps to protect your children from knocks, bumps and, of course, catching your clothing.

Non toxic treatment
We are very proud that our Climbing Frames are pressure treated against rot and fungal decay, meaning you don’t have to treat them for at least 10 years. We’ve also tested our treated timber, which is non toxic, arsenic free, copper chrome treatment for your children’s safety, to EN71-3 to ensure that the chemicals are safe to use on children’s products – which seems obvious but other companies use solvents to treat similar products.

To see our safety testing in action, check out our short YouTube video:

Please note: Although our Climbing Frames are put through stringent testing to ensure they meet European Safety Standards, both EN71 and CE, they are not tested to EN76 standards meaning they are not designed to be used by the public and are for domestic use only.

To order one of our Climbing Frames today, or ask any more questions about CE EN71, visit our website or call our sales team on 01234 272 445. As always, you can always ask for more details on our social media pages or in the comments below.

 

[1] http://www.toysadvice.co.uk/toy-safety-standards-uk.html

July 11, 2016

Leave a Reply

Your email address will not be published. Required fields are marked *